APPLICATIONS These machine plates will match up with your present Portage brand plates for use combination set-ups, or they can be used individually.

GENERAL SPECIFICATIONS They are 6" thick with one inch thick solid tops and heavily ribbed construction underneath for good surface rigidity under heavy loads.

The sides and ends are machined square with the top to they can be combined accurately to provide surfaces of almost any size.

Dowel pin stops are installed at the end of each slot.

GUIDING SLOTS The guiding slots on which machines or measuring devices move are in a grid starting at 5" from the edges and 10" apart in both directions to provide accurate movement of the measuring heads in any position.

TOLERANCES Machine finished flat within .002". Slot center to center is ±.001". Tolerance is noncumulative between slots to ensure continuous movement of N/C measuring equipment when two or more tables are combined.

When used in combination with each other, tolerances open to .005"

OPTIONS Grid patterns, scribe lines, drilled and tapped holes, and installation and calibration services.

APPROX. SHIPPING WEIGHT 2300 lbs / 1044 kg

These heavy duty stands have leveling screws on all four legs so plates can be accurately leveled. They are 24" high with 1" required for adjustment devices which provides a working height of 31".

Leveling can be done through holes in the table surface.