Dimensions and Ordering Information
| Size (inches) AxBxC | Part Number | Approx Ship Wt. | See Fig. |
|---|---|---|---|
| 4x5-1/2x5 | AS-0405E05 | 11 lbs / 5 kg | B |
| 5x6x12 | AS-050612 | 35 lbs / 16 kg | C |
| 6x8x6 | AS-060806 | 25 lbs / 11 kg | D |
| 8x12x10 | AS-0812104 | 88 lbs / 40 kg | A |
| 9x10x12 | AS-091012 | 80 lbs / 36 kg | B |
| 12x14x16 | AS-121416 | 205 lbs / 92 kg | E |
| 16x18x20 | AS-161820 | 305 lbs / 137 kg | F |
| 18x24x12 | AS-182412 | 340 lbs / 153 kg | G |
| Figure A | Ribs | Slot Size | Slot Location | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Angle | Size | Thick | To Side | Between | Ver Length | Both Width | Base Length | To Side | To Edge |
| AxBxC | D | E | F | G | H | I | J | K | L |
| 4x5x9 | 5/8 | 1/2 | 2-1/4 | 4-1/2 | 3 | 9/16 | 2 | 4-1/2 | 3/4 |
| 8x12x10 | 1-1/4 | 3/4 | 2-1/2 | 5 | 8 | 11/16 | 4 | 5 | 1-1/2 |
| Figure B | Ribs | Slot Size | Upright Slot | Base Slot | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Angle | Size | Thick | To Side | Bet | Ver Lgth | Slot Width | Base Lgth | Bet | To Side | To Edge | To Side | To Edge |
| AxBxC | D | E | F | G | H | I | J | K | L | M | N | O |
| 4x5½x5 | 5/8 | 1/2 | 1/2 | 4 | 3 | 9/16 | 2-1/2 | 2 | 1-1/2 | 1 | 1-1/4 | 1-3/4 |
| 9x10x12 | 1 | 3/4 | 2-3/8 | 7-1/4 | 6-1/2 | 11/16 | 4-3/4 | 4 | 4 | 1-1/2 | 3-5/8 | 4 |
| Figure C | Ribs | Slot Size | Slot Loc | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Angle | Size | Thick | To Side | Bet Ribs | Ver Lgth | Slot Width | Base Lgth | To Side | Bet Slot | To Edge |
| AxBxC | D | E | F | G | H | I | J | K | L | M |
| 5x6x12 | 3/4 | 1/2 | 3 | 6 | 3-1/4 | 9/16 | 2-1/4 | 1-3/8 | 4-5/8 | 1 |
| Figure D | Ribs | Slot Size | Slot Loc | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Angle | Size | Thick | To Side | Ver Lgth | Slot Width | Both Width | To Side | Bet Slot | To Edge |
| AxBxC | D | E | F | G | H | I | J | K | L |
| 6x8x6 | 1 | 3/4 | 3 | 5-1/4 | 11/16 | 3-1/4 | 1-5/16 | 3-3/8 | 1 |
| Figure E | Ribs | Slot Size | Slot Loc | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Angle | Size | Thick | To Side | Bet Ribs | Ver Lgth | Slot Width | Base Lgth | To Side | Bet Slot | To Edge |
| AxBxC | D | E | F | G | H | I | J | K | L | M |
| 12x14x16 | 1-3/8 | 3/4 | 2 2/3 | 5 1/3 | 10 | 13/16 | 8 | 5-1/2 | 5 | 1-1/2 |
Tolerances
The two outside working surfaces are precision ground flat & square to within .0005" up to 6" and graduated to .0001" per inch thereafter.
Options
Sides and ends can be precision ground.
Matched pairs also available. (Matching refers to overall dimensions only.)
